Aquatec PI-960 Dive Gear Power Inflators Courrugated Hose
PI-960 Scuba Power Inflators
Power inflator, Scuba Power Inflator, Diving Power Inflator, Dive Power Inflator, AIR-300, AIR-3, BCD Parts and Components
This is a feature rich integrated octo. Yet its size and weight is hardly much larger than a simple power inflator. Its breathing ability is adequate for a safe accent although not as good as other integrated octos that rival mainstream primary second stages. The layout of the controls is not as instinctual as others this may be due to the need to fit a third button for the subduck.
Most single tank air cells come standard with a low-pressure hose, oral/power inflator, corrugated hose, and depending on the model either a remote exhaust elbow dump valve or plain elbow. With a remote exhaust elbow, a cable runs from the inflator inside the corrugated hose up to the remote exhaust dump valve. To exhaust gas from the air cell, you need only tug gently on the inflator.
Scuba Gear Technical Information:
Four in One
Air Horn (Up to 1/2 mile)
Underwater Signaling device
An idea replace for apare Second stage.
Integrated with BCD inflator air system.
Signaling in both underwater and surface, very high volume 110-120 dB range over 1.0 Km.
Intermediate pressure: 145 PSI.
Inhalation effort: 1.6-2.0 CIW (Column inches of Water).
Exhalation efferot: 1.1 CIW.
Flow rate: 30+SCFM (Air supply: 3000PSI).
Compatible with all BC’s except by Aeris, Aqua-Lung, Cressi, Dacor, Oceanic, SeaQuest, TUSA models with the A.P.A. Active Purge Assist inflator system, US Divers and XS Scuba
Length: 550 mm/21.7 inch.
⊙ Diving Equipment OEM & ODM available.
⊙ Diving Equipment customization.
⊙ Manufactured by: Aquatec
After each use, must be rinsed with fresh water.
Scuba Gear Service Kit