Aquatec PI-303 Scuba Gear Power Inflators Courrugated Hose


{{ reviewsTotal }}{{ options.labels.singularReviewCountLabel }}
{{ reviewsTotal }}{{ options.labels.pluralReviewCountLabel }}
{{ options.labels.newReviewButton }}
{{ userData.canReview.message }}

PI-303 Scuba Power Inflators

Power inflator, Scuba Power Inflator, Diving Power Inflator, Dive Power Inflator, BCD Parts and Components

Power Inflator Old Style With Inflator Button and Deflator Button. This is a standard power inflator. This version use in Millitary BCDs. This is a standard power inflator. The power inflator will fit most BCDs and wings made. This is the new style with the inflator button on the inside edge The power inflator diameter hole is 1″ across the opening.

Most single tank air cells come standard with a low-pressure hose, oral/power inflator, corrugated hose, and depending on the model either a remote exhaust elbow dump valve or plain elbow. With a remote exhaust elbow, a cable runs from the inflator inside the corrugated hose up to the remote exhaust dump valve. To exhaust gas from the air cell, you need only tug gently on the inflator.

Scuba Gear Technical Information:

Standard Power Inflator with Built-In Underwater Horn, Can Be Used to Retrofit Most BCDs
Horn Works Both Underwater and on the Surface!
Steel Pin in Air Outlet to Connect to BCD “Pull Dump” Feature
Uses Standard LP Inflator Hose and 1″ Corrugated BCD Hose
Ridge on Outside of Air Outlet to Create a Secure Seal with the BCD Corrugated Hose
Great Ergonomic Design Allows Access to All Three Functions: Inflate, Deflate, and Horn
Comfortable Mouthpiece for Easy Oral Inflation
Horn is Very Loud Above Water-Keep Away From Ears at All Times
Volume: Approx. 115-125 dB.
Length: 570 mm/22.5 inch.
⊙ Diving Equipment OEM & ODM available.
⊙ Diving Equipment customization.
⊙ Manufactured by: Aquatec


After each use, must be rinsed with fresh water.

Scuba Gear Service Kit